Getting It Together

Just some nice stuff from our friends. Incredible to be part of all this!

Tor

My most lovely companion has left to look for better hunting. We liked to sing in the morning. His most loved friend was Emma, cooling him off with a spray of water. I'll miss you My Buddy. R.I.P.

Two New Guitars.

Friday, great day! we put strings on two guitars in one day. Claudi with his Overcaster! And Marc with a sweet LesPaul junior. Both guitars play great. Also Garci strung up his LP double cutaway T.V style on Thursday

, with Bigsby! The hardest part is taking them apart again to sand and paint.

More Latest

Getting everything adjusted to the old neck is a nightmare! Trying not to touch the old varnish on the sides of the neck. So far, O.K. Next leveling and fretting. Ready with frets cleaned, barbs narrowed, bent to over-radius. And fretted!

Latest Projects

A new fingerboard for a 66 tele. Old one very worn out, and the owner wants maple. I bent a fingerboard over a 7 1/4 radius, hot water and a week in the sun did a nice job. Planed off the rosewood board, and glued on the new curved board. Drove me crazy getting everything to close nicely over the curve, but finally worked out nicely.

Latest Stuff

We have found that the sound of our flamenco guitars is improved by acupuncture.

HaHa! Really this is the first step in doing a pearl segment binding to match the rosette.

This was inspired by an old guitar that I had in the shop for restoration awhile ago.

Pickup HB90

A friend needs a nice single coil pickup that he can fit in a humbucker rout. Here's how I did it. Actually there exits this, but I wanted to do it myself. First I trimmed off the bottom of a P90 bobbin, Made it about 3\32 wider, shortened it to HB size, then glued a new back plate of hardwood. Using the top holes of the bobbin as a guide, re-drilled for the screws. I used the bottom spacer to line up the holes for the HB frame. Then I wound the bobbin with 0.06mm wire(about 42 gauge. Got it up to about 7.6K about the same as a Tele bridge PU.After winding, I assembled the bobbin, magnets and screws,cut down a soapbar cover to fit inside the open top cover.